Canyon Rim rambler
Brick veneer on hollow block; Anton set every anchor in the block's solid web, clear of mortar.
Tech: Anton · On site: 1 h 40 min
Millcreek packs three eras of housing: postwar homes in Canyon Rim, 1960s and 70s split-levels across East Mill Creek, and new townhomes along Highland Drive. Anton's crew works here every week, so we usually arrive the same day with anchors matched to your wall and a flat price up front.
TV mounting in Millcreek is flat-rate: $119 up to 60", $129 for 61–85" and from $179 for 86" and larger, plus $40 for each additional TV. Mounts from $39, cables hidden in a raceway for $39 or inside the wall for $69. No travel fee and no surcharge for brick or concrete.
Ramblers have a brick fireplace wall in the living room and drywall or plaster elsewhere. We drill brick only in solid faces with masonry anchors and use lag bolts into studs on framed walls. Brick vs. veneer.
Basements have framed walls in front of the concrete foundation. The mount goes into the studs, and the cables run through the framing cavity to an outlet ($69). Hiding cables.
Hillside homes have tall walls of windows toward the valley and stone fireplaces. We pick the wall out of the glare, check the heat and the viewing height, and use a tilting mount ($49) when the TV sits high. TV height.
The Wasatch Fault runs along the east bench. Every mount goes into studs or masonry with hardware rated well above the TV, and every articulating arm gets a safety strap. Toggles vs. lag bolts.
28,104 homes and about 63,648 residents. The age and type of a home decide what is behind the drywall, so we check this before we quote.
61% owner-occupied · 39% rented
U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates: year built, units in structure, tenure.
The median Millcreek home was built in 1973, and 33.3% went up between 1960 and 1979, the largest share of any era. That usually means wood studs behind drywall upstairs and a framed basement wall below. With 38.6% of households renting, many TV walls belong to a landlord, so we often suggest a painted raceway that leaves only the mount holes at move-out. Infill townhomes add shared party walls, which change how we hide cables.
Canyon Rim and the older parts of Olympus Cove filled up after World War II, when returning veterans bought homes here. Many of those houses pair brick veneer with cinder block or framed walls, so Anton always starts with one small test hole: veneer is a skin, not structure, and anchors must reach the block's solid web or a stud behind it. The 1960s and 70s split-levels of East Mill Creek are friendlier — drywall on wood studs upstairs, a framed wall ahead of the foundation downstairs — and a hidden cable run there is $69. The newest era started after 2010, when growth turned to infill townhomes along the Highland Drive corridor, such as Opus Green and Axis. There the TV wall is often shared with a neighbor, which changes how we hide the wires.
Rather have a pro do it?
Send a request — we'll confirm the exact price and a time that suits you by text or call. 3-year warranty on every install.
In a rental or a Highland Drive townhome, the cable plan comes before the bracket. On a wall you share with a neighbor, we mount into the studs but keep electrical boxes out of the cavity and run a slim raceway painted to the wall color ($39); at move-out it leaves only small screw holes. In a detached house, an in-wall run uses a listed power kit fed from your existing outlet; the TV's own cord never goes inside the wall. A brand-new outlet is an electrician's job, and Millcreek's Building Department asks for a permit on nearly all construction. Townhome association? Utah law limits HOA rules on a dwelling's interior and lets you hire a contractor who is not on a preferred-vendor list. Send photos of the wall through our request form, and we will plan the run before arriving.
A few jobs from the last months — the kind of walls and setups we see here most.
Brick veneer on hollow block; Anton set every anchor in the block's solid web, clear of mortar.
Tech: Anton · On site: 1 h 40 min
Shared party wall: Anton lagged into studs, skipped the in-wall box, ran a painted raceway and strapped the arm.
Tech: Anton · On site: 1 h 30 min
A duct bulkhead sat above the wall, so Anton picked a bar without up-firing drivers and ran cables to the stair closet.
Tech: Anton · On site: 2 h 30 min
Ready to book or have questions? Send a request — we’ll reply within minutes.
One price list for the whole Wasatch Front — the wall type does not change the price, and neither does the drive. Plaster over brick, basement framing and earthquake straps are billed exactly like drywall.
| Service | Price |
|---|---|
| Up to 60" | $119 |
| 61–85" | $129 |
| 86" and larger | from $179 |
| Each additional TV | from $40 |
| Frame / art TV | from $169 |
| Fixed | $39 |
| Tilting | $49 |
| Full-motion | $69 |
| Heavy-duty, for 86"+ | from $59 |
| Internal (inside the wall) | $69 |
| External (cable raceway) | $39 |
Jobs in Millcreek are handled by our Salt Lake crew — Anton, Borys — on the same flat rates as everywhere else, with the same hardware on every truck and the same 3-year warranty. Crews run out of the south valley and Davis County. Pick a slot in the calculator and we confirm it by text.
Basement family room TV in East Mill Creek
Living-room TV on a Canyon Rim wall
Townhome TV off the Highland Drive corridor
Split-level den TV in East Millcreek
Olympus Cove great room facing the valley
Bedroom TV in a Millcreek rental
Basement family room TV in East Mill Creek
Living-room TV on a Canyon Rim wall
Get the exact total in the calculator, pick a time and we confirm by text — or call us and a person picks up.
Leave your number — a real person texts you back to confirm.