TV Mounting in Erwin, NC

Plaster, planks and your house's age

The first thing Tymofii asks in Erwin is when the house went up, because the answer predicts the wall. Mill-era cottages often have wood planks over the studs, and a stud finder reads nothing through them, so he probes with small pilot holes inside the bracket's footprint, where they stay hidden. Houses from the 1950s and 1960s tend toward plaster on lath, which takes about an hour and a half: slow drilling, a test hole first, and a plaster-rated mount when the screen is heavy. In homes older than 1978 our drilling stops at the few holes the bracket and cables need, a shroud catches the dust, and paint is never sanded. If the TV spot has a two-prong outlet, we pause and let your electrician ground it first. Expect a careful visit, not a slow one.

Infill homes and hidden cables

Erwin's newer homes mostly go up one lot at a time — a 2024 house on 3rd Street downtown, builder plans on Cypress Hollow Lane — so there is rarely an HOA rulebook to clear first. These walls are wood studs behind drywall, the best setting for hidden cables. A listed in-wall power kit ($69) runs from the outlet below the TV to a recessed box behind it; the TV's own cord plugs into that box and never travels inside the wall. Some builders frame 24 inches on center, so we choose a bracket wide enough to catch two studs. A 75-inch or larger screen always comes with a second technician, and a full-motion arm ($69) lets a family-room TV swing toward the kitchen. Details are on our cable concealment page; Dunn and Lillington get the same crew.