Culver City house with a low credenza
A low credenza left no room below the screen, so Dmytro mounted the soundbar above it with the maker's recommended gap.
Tech: Dmytro · On site: 1 h 30 min
TV Mounting in Culver City, CA
Culver City is nearly half renters, with postwar bungalows, 1970s Fox Hills condos near the mall and Hayden Tract warehouses that Eric Owen Moss turned into offices. Dmytro's Westside crew knows each of those walls, sends building paperwork fast and works at flat prices; ask before noon and we can often come today.
TV mounting in Culver City is flat-rate: $119 up to 60", $129 for 61–85" and from $179 for 86" and larger, plus $40 for each additional TV. Mounts from $39, cables hidden in a raceway for $39 or inside the wall for $69. No travel fee and no surcharge for plaster or brick.
★★★★★ 4.9★ from 480+ reviews
Los Angeles County
Same-day slots, 7 days a week
No travel fee — one price across the area
- 1963median year homes in Culver City were built
- 41%of homes in Culver City are in buildings with 5+ units
- since 2019Dmytro's crew on Culver City walls
- about 1 in 3Westside building jobs that need an insurance certificate
Ranch houses, Fox Hills condos and studio-area offices
Carlson Park, Sunkist Park and Jefferson Park houses are wood studs on 16-inch centers, some with the original plaster, many drywalled during remodels. Two studs, 5/16-inch lag bolts and an in-wall power kit ($69) is our most common Culver City job — the stud bay runs open from the TV to the outlet.
Fox Hills condos have concrete demising walls and wood or steel interiors, plus HOA rules on work hours. Offices downtown and near the studio lots mostly have steel studs; we mount conference displays on toggles into two studs and route HDMI to a floor box or the table.
Hiding cables in Culver City homes
Because most walls are framed, cables almost always go inside the wall here: a recessed box behind the TV, a matching one near the outlet, and a UL-listed power kit between them — never an extension cord in the wall. Hiding TV wires in the wall.
Culver Crest and Blair Hills views
Hillside homes above Culver City are built around the view, which means big windows opposite the TV wall. A few degrees of tilt cuts afternoon glare; for open plans, a full-motion arm ($69) lets the screen follow the room.
Homes in Culver City by the numbers
18,803 homes and about 39,931 residents. The age and type of a home decide what is behind the drywall, so we check this before we quote.
When homes were built
- 2010 or later 4%
- 2000–2009 3%
- 1980–1999 9%
- 1960–1979 39%
- Before 1960 45%
What kind of homes
- Detached houses 36%
- Townhomes 9%
- 2–4 units & other 13%
- 5–19 units 13%
- 20+ units 28%
55% owner-occupied · 45% rented
U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates: year built, units in structure, tenure.
What this means for your TV wall
Most Culver City homes are older than they look: 45.2% were built before 1960 and another 38.6% in the 1960s and 70s. Expect plaster or early drywall, old paint under new coats, and outlets placed for a console TV, not a screen at eye level. On the other side, 28.0% of homes sit in buildings of 20 or more units, where concrete walls and management rules shape the plan before we drill.
Fox Hills condos and the apartments still to come
Fox Hills joined Culver City in 1964 as roughly 330 acres of former county golf course, then filled with 1970s apartments and condominiums around the mall that opened in 1975. That history shows on the TV wall: poured concrete between units, an outlet low on the wall, and a management office that wants our insurance first. We send the certificate the morning you book, set sleeve anchors in the concrete and, when the board won't allow cuts, run a painted raceway ($39).
The neighborhood is changing fast. In January 2025 the city counted 4,201 housing units in its pipeline, with four of the five largest projects here, and Bisnow reported one Fox Hills redevelopment expected to bring nearly 3,000 apartments. New buildings often mean steel studs and fresh leases; we read both before drilling.
Rather have a pro do it?
Send a request — we'll confirm the exact price and a time that suits you by text or call. 3-year warranty on every install.
Renting in Culver City: a TV wall you can leave behind
Culver City has a rent control ordinance and a big renter share, so many of our visits here start with a lease, not a stud finder. The ordinance covers rents and registration; whether you may drill is up to your lease and landlord. Get the okay in writing, ask whether anchor holes must be filled at move-out, and send both along when you request a visit. If drilling is fine but cutting drywall is not, we hang the TV into studs and run a raceway painted to the wall color. Mention the building's quiet hours too, and we plan the drilling around them.
At move-out we take the TV down ($49), pull the anchors and fill the holes, then rehang it at your next place, whether that is nearby or in Santa Monica.
From our Culver City job log
A few jobs from the last months — the kind of walls and setups we see here most.
Fox Hills condo
Management wanted insurance paperwork first; we emailed it that morning, set sleeve anchors in the concrete and ran a painted raceway.
Tech: Dmytro · On site: 1 h 45 min
Hayden Tract creative office
Hollow block wall: every anchor went into the block's web, never a mortar joint; the client's electrician added an outlet behind.
Tech: Dmytro · On site: 2 h
On-site notes from Culver City jobs
- Plaster remains in many original 1940s bedrooms even when the living room was redone in drywall.
- Fox Hills HOAs usually allow weekday work only; we book accordingly.
- For offices we can work before opening hours.
Contact Us
Ready to book or have questions? Send a request — we’ll reply within minutes.
What TV mounting costs in Culver City
One price list for all of Southern California — the wall type does not change the price, and neither does the drive. Lath and plaster, brick fireplaces and steel-stud condos are billed exactly like drywall.
| Service | Price |
|---|---|
| Up to 60" | $119 |
| 61–85" | $129 |
| 86" and larger | from $179 |
| Each additional TV | from $40 |
| Frame / art TV | from $169 |
| Fixed | $39 |
| Tilting | $49 |
| Full-motion | $69 |
| Heavy-duty, for 86"+ | from $59 |
| Internal (inside the wall) | $69 |
| External (cable raceway) | $39 |
How we serve Culver City
Jobs in Culver City are handled by our Southern California crew — Kostiantyn, Oleh, Dmytro — on the same flat rates as everywhere else, with the same hardware on every truck and the same 3-year warranty. Crews run out of the Westside, the Valley and North Orange County. Pick a slot in the calculator and we confirm it by text.
Read before your Culver City install
- How to Hide TV Wires In the Wall (In-Wall Cable Concealment Guide)
- How Much Does TV Mounting Cost in Los Angeles? 2026 Prices
- What Is the Best TV Wall Mount? Installer's Picks by Size and Use Case (2026)
- How to Mount a TV on Metal Studs: Toggle Bolts for Condos and High-Rises
- Commercial Menu Board & Digital Signage Installation in Miami
Free tools
Recent installs around Culver City
Living-room TV in a Fox Hills condo
Soundbar above the TV over a low credenza
Conference display in a Hayden Tract office
Mid-century ranch living room near Sunkist Park
Painted raceway along a renter's apartment wall
Tilted TV facing a big Culver Crest window
Living-room TV in a Fox Hills condo
Soundbar above the TV over a low credenza
TV mounting in Culver City, CA: common questions
Can you hide TV wires inside the wall in Culver City?
In most houses, yes — framed walls make in-wall routing simple ($69).
Do you mount TVs in offices and conference rooms?
Yes. We mount displays on steel-stud and concrete walls and route cables to a floor box or table.
How much does TV mounting cost in Culver City?
$119 up to 60 inches and $129 up to 85 inches, with no travel fee.
Do I need a city permit to mount a TV in Culver City?
A TV mount alone is ordinary installation work. A new outlet behind the screen is electrical work a licensed electrician files through the city's online permit portal; without one we use a listed in-wall power kit.
How fast can you send my Fox Hills building an insurance certificate?
Usually the same day. About 1 in 3 Westside building jobs needs one, so send the management office's email and exact wording. If your request reaches us before noon, the visit can often happen that afternoon.
Can you cut plaster walls in my 1950s house for cables?
In pre-1978 homes older paint needs care, so we keep our two openings small, skip sanding and clean as we go. If a bigger cut would disturb more paint than a small repair, we switch to a raceway instead of cutting first.
Where these facts come from
- Fox Hills, Culver City, California — Wikipedia
- Get Involved with the Fox Hills and Hayden Tract Specific Plans — City of Culver City
- Demolitions Planned In Culver City Neighborhood Expecting Nearly 3,000 New Apartments — Bisnow
- AIA Names Conjunctive Points as Twenty-Five Year Award Winner — Architect Magazine
- Culver City rent control ordinance notice
- Create an Online Permit Portal Account — City of Culver City
Schedule your TV installation in Culver City
Get the exact total in the calculator, pick a time and we confirm by text — or call us and a person picks up.
Nearby areas we serve
Santa MonicaMarina del ReyBeverly HillsEl SegundoManhattan Beach TV Mounting Los Angeles, CA