Sony BRAVIA 8 II wall mount specs: VESA and weight for every size

The Sony XR80M2 comes in 55 and 65". Every size takes a VESA 300 × 300 mm mount. Without the stand it weighs 37.9 to 50.5 lb; the table has the screws and the US model number for each size.

Sony BRAVIA 8 II mounting specs by size

Screen size	VESA, mm	Weight without stand	Screws	US model number
55"	300 × 30011.81 × 11.81 in	37.9 lbWith stand: 40.6 lb	—	K-55XR80M2K-55XR80CM2Same specs as: XR8B (2025), XR80 (2024)
65"	300 × 30011.81 × 11.81 in	50.5 lbWith stand: 53.4 lb	—	K-65XR80M2K-65XR80CM2

2025 model, QD-OLED. VESA and weight from Sony's product page, checked Sep 22, 2026. If the model number on your sticker differs, measure your own holes.

Mounts that fit the Sony XR80M2

Each one lists 300 × 300 mm, a rating above 50.5 lb and 65" screens on its own spec sheet.

Fits this TV

Passes the size, weight and pattern checks above

Mounting Dream UL Listed Advanced Tilt TV Wall Mount for Most 42-90 Inch TV

For the XR80M2 55 and 65"

Tilting bracket: angles the screen down when it hangs high.

Made for 42–90" screens
Rated to 120 lb — your panel is about 50 lb
Takes VESA patterns up to 600 × 400 mm
UL listed
Spans 16", 18", 24" stud spacing
Reaches 7" out from the wall

Check price on Amazon

Also fits

A second option that passes the same checks

Mounting Dream Fixed TV Wall Mount Low Profile TV Bracket for 42-90 Inch TV

For the XR80M2 55 and 65"

Fixed bracket: the panel sits flat, closest to the wall.

Made for 42–90" screens
Rated to 132 lb — your panel is about 50 lb
Takes VESA patterns up to 800 × 400 mm
Spans 16", 24", 32" stud spacing

Check price on Amazon

If it needs to tilt or swivel

Full motion

Pulls out and swivels for corners and open rooms

Perlegear Corner TV Wall Mount Long Arm TV Mount Bracket for 37-75 Inch TVs

Listed for 300 × 300 mm and 50.5 lb

Articulating arm: pulls out, swivels and tilts.

Made for 37–75" screens
Rated to 100 lb — your panel is about 50 lb
Takes VESA patterns up to 600 × 400 mm
Reaches 32.4" out from the wall

Check price on Amazon

As an Amazon Associate, TV Mount Q earns from qualifying purchases. We never show a price here: Amazon prices change daily, so the button takes you to the current one.

The Sony XR80M2 against its lineup

11 of the 12 Sony 65" models from 2024 to 2026 use 300 × 300 mm. The others use 400 × 200 (1). 5 of them weigh more than this one. At 50.5 lb it is about 7% heavier than the 47 lb typical of 65" panels, so read the weight rating before the size range.

Screws, studs and height

Sony does not list the screw size for this model. Most TVs use M6 or M8; try the screws in the bracket's kit by hand before tightening anything.

The holes are 11.8" apart side to side; the wall plate of the bracket, not the TV, has to reach the studs.

With the centre at 42" for sofa seating, a 65" screen runs from about 26" to 58" off the floor. In a bedroom the centre goes 42–50". Work it out for your own seat →

Other TVs on 300 × 300 mm

Sony XR8B 65", 49.2 lb Sony S30 65", 47.2 lb Sony XR50 65", 54.9 lb Sony XR30M2 65", 45.9 lb Sony S20M2 65", 43.4 lb Sony XR70M2 65", 58.6 lb

Every TV on 300 × 300 →

Frequently asked questions

What VESA pattern does the Sony XR80M2 use?

Every size takes a VESA 300 × 300 mm mount. From Sony's product page, checked Sep 22, 2026.

How much does the Sony XR80M2 weigh?

55" 37.9 lb and 65" 50.5 lb without the stand. Bracket ratings are for the panel alone, so these are the numbers to shop against.

Can the Sony XR80M2 hang on drywall without studs?

No. Drywall alone is for TVs up to about 32" and 30 lb on rated anchors. The Sony XR80M2 starts at 55" and 37.9 lb, so it needs bolts in the studs, or masonry anchors in brick or concrete.